Headway EDB-1 Preamp Double Bass / Guitar / Violin Boxed

Brings pro-audio quality to acoustic instrument sound shaping. With the compact Headway EDB-1 (Sheer Acoustic Equaliser Direct Blend) mega multi-purpose external pre-amplifier box you can completely shape your sound with a 5-band interactive EQ, switchable input impedance, and 3-way range switch.

The preamp's controls offer acoustic guitar, bass, or violin settings-which cut unwanted low end tones below the useable frequency range of the instrument. Feedback and other resonance problems may be further tackled by a very effective, broad-ranging tunable notch filter and a phase reverse control. The Headway EDB-1 preamp's inputs provide plenty of options for any amplification you use. Whether using a 1/4" jack, balanced stereo 1/4" jack, or XLR jack for a microphone, the EDB-1 has got you covered. Headway EDB-1 inputs include mono jack, stereo jack and XLR, through 2 channels.

You can plug into them with 1 or 2 standard mono jack leads, a jack lead plus an XLR, or a stereo jack lead. An unbalanced 1/4 jack would be related to the Channel 1 input. Phantom power is also available to jack in and XLR inputs, making the unit friendly for use with quality condenser mics and Instruments wired with no battery inside instrument, but with active pickups needing powering. The outputs use a balanced XLR out and a line out jack. If an earth loop is heard causing hum, you may kill it by pressing the earth lift switch.

The two outputs also allow you to split the signal, such as between an acoustic combo amp for stage monitoring and an out front mixing desk. Powering is via two 9v PP3 (6F22) batteries, or via plug-in DC Power supply.

3-way Range control selects High Pass Filter/Low-cut settings for guitar. Tunable Notch Filter with variable band width + In/Out. Phantom power to Inputs via switch. Balanced XLR Line Out (Mix of 2 channels) + Earth Lift switch. Jack line out in mono mix of 2 channels.

Battery or external DC Plug-in power supply. Dimensions: 5-1/2"D x 3-3/4"W x 1-3/4H (height includes low-profile knobs). Get the most out of your plugged-in acoustic sound. Order the EDB-1 Acoustic Instrument Preamp today! Input Impedance: +Hi = >20mOhm, Hi = >5mOhm, Active = >1mOhm. Gain Control: Continuously Variable 0 - +30dB.

Input Impedance - Jack: Hi = >5mOhm, Instr = >1mOhm. Input Impedance - XLR: >2kOhm Balanced. Gain Control - Jack: Continuously Variable 0 - +30dB. Gain Control - XLR : Continuously Variable 0 - +50dB. Q Width: 0.5-5.0.

RANGE SWITCH (High Pass Filter). XLR Mic Input: 18v with 2K7 Current Limit Resistors (pins 2 & 3). 1 Jack Input: 12v with 10mA Current Limit. 2, via Mono Jack Socket For 1/4 Dia. 2, via XLR Out (Mono).

XLR Wiring: Pin 1 = Gnd, Pin 2 = + Signal, & Pin 3 = -Signal. This item is in the category "Musical Instruments & DJ Equipment\Guitars & Basses\Parts & Accessories\Effects Pedals\Other Guitar Effects Pedals". The seller is "vpnrouter_uk" and is located in this country: GB.

This item can be shipped to United Kingdom.

Brand: HEADWAY
Type: NA
Bundle Description: NA
To Fit: Acoustic Guitar, Classical Guitar, Double Bass